Tool life testing on a lathe under dry cutting conditions gave $$'n'$$ and $$'C'$$ of Taylor tool life equation as $$0.12$$ and $$130$$ $$m/min,$$ respectively. When a coolant was used, $$'C'$$ increased by $$10\% $$. The increased tool life with the use of coolant at a cutting speed of $$90$$ $$m/min$$ is

Identical straight turning operation was carried out using two tools : $$8 - 8 - 5 - 5 - 5 - 25 - 0\,(ASA)$$ and $$8-8-5-5-7-30-0(ASA)$$. For same feed the tool which gives better surface finish is

Allowance in limits and fits refers to

The cutting force in punching and blanking operations mainly depends on