Metric thread of $$0.8$$ $$mm$$ pitch is to be cut on a lathe. Pitch of the lead screw is $$1.5$$ $$mm.$$ If the spindle rotates at $$1500$$ $$rpm,$$ the speed of rotation of the lead screw $$(rpm)$$ will be _____________

A $$10$$ $$mm$$ deep cylindrical cup with diameter of $$15$$ $$mm$$ is drawn from a circular blank. Neglecting the variation in the sheet thickness, the diameter (upto $$2$$ decimal points accuracy) of the blank is _________ $$mm.$$

Cylindrical pins of diameter $${15^{ \pm 0.020}}\,\,mm$$ are being produced on a machine. Statistical quality control tests show a mean of $$14.995$$ $$mm$$ and standard deviation of $$0.004mm.$$ The process capability index $${C_p}$$ is

A block of length $$200$$ $$mm$$ is machined by a slab milling cutter $$34$$ $$mm$$ in diameter. The depth of cut and table feed are set at $$2$$ $$mm$$ and $$18$$ $$mm/minute,$$ respectively. Considering the approach and the over travel of the cutter to be same, the minimum estimated machining time per pass is _____________ minutes.