A block of length $$200$$ $$mm$$ is machined by a slab milling cutter $$34$$ $$mm$$ in diameter. The depth of cut and table feed are set at $$2$$ $$mm$$ and $$18$$ $$mm/minute,$$ respectively. Considering the approach and the over travel of the cutter to be same, the minimum estimated machining time per pass is _____________ minutes.

A $$10$$ $$mm$$ deep cylindrical cup with diameter of $$15$$ $$mm$$ is drawn from a circular blank. Neglecting the variation in the sheet thickness, the diameter (upto $$2$$ decimal points accuracy) of the blank is _________ $$mm.$$

Cylindrical pins of diameter $${15^{ \pm 0.020}}\,\,mm$$ are being produced on a machine. Statistical quality control tests show a mean of $$14.995$$ $$mm$$ and standard deviation of $$0.004mm.$$ The process capability index $${C_p}$$ is

Assume that the surface roughness profile is triangular as shown schematically in the figure. If the peak to valley height is $$20$$ $$\mu m$$ The central line average surface roughness $${R_a}$$ (in $$\mu m$$) is