In an arc welding process, welding speed is doubled. Assuming all other process parameters to be constant, the cross sectional area of the weld bead will

Two cutting tools with tool life equations given below are being compared:
$$\eqalign{ & Tool\,\,1:\,\,\,\,\,\,\,V{T^{0.1}} = 150 \cr & Tool\,\,2:\,\,\,\,\,\,\,V{T^{0.3}} = 300 \cr} $$
where $$V$$ is cutting speed in $$m/minute$$ and $$T$$ is tool life in minutes. The breakeven cutting speed beyond which Tool $$2$$ will have a higher tool life is _______________ $$m/minute$$.

Metric thread of $$0.8$$ $$mm$$ pitch is to be cut on a lathe. Pitch of the lead screw is $$1.5$$ $$mm.$$ If the spindle rotates at $$1500$$ $$rpm,$$ the speed of rotation of the lead screw $$(rpm)$$ will be _____________

A block of length $$200$$ $$mm$$ is machined by a slab milling cutter $$34$$ $$mm$$ in diameter. The depth of cut and table feed are set at $$2$$ $$mm$$ and $$18$$ $$mm/minute,$$ respectively. Considering the approach and the over travel of the cutter to be same, the minimum estimated machining time per pass is _____________ minutes.