Cylindrical pins of $${25^{\matrix{ { + 0.020} \cr { + 0.010} \cr } }}\,\,mm$$ diameter are electroplated in a shop. Thickness of the plating is $$30 \pm 0.2$$ micron. Neglecting gage tolerances, the size of the $$GO$$ gage in $$mm$$ to inspect the plated components is

In a $$CAD$$ package, mirror image of a $$2D$$ points $$P(5, 10)$$ is to be obtained about a line which passes through the origin and makes an angle of $${45^ \circ }$$ counterclockwise with the $$X$$-axis. The coordinates of the transformed points will be

A rod of length $$L$$ having uniform cross-sectional area $$A$$ is subjected to a tensile force $$P$$ as shown in the figure below. If the Young’s modulus of the material varies linearly from $${E_1}$$ to $${E_2}$$ along the length of the rod, the normal stress developed at the section $$-$$ $$SS$$ is

A simply supported beam of length $$L$$ is subjected to a varying distributed load $$\sin \left( {3\pi x/L} \right)N{m^{ - 1}},$$ where the distance $$x$$ is measured from the left support. The magnitude of the vertical reaction force in $$N$$ at the left support is