GATE CE 2024 Set 2
Paper was held on
Sun, Feb 12, 2023 9:00 AM
GATE CE
Consider the statements P and Q. P: In a Pure project organization, the project manager maintains complete authority and
View Question Consider the following data for a project of 300 days duration.Budgeted Cost of Work Scheduled (BCWS) = Rs. 200Budgeted
View Question A critical activity in a project is estimated to take 15 days to complete at a cost of Rs. 30,000. The activity can be e
View Question In the context of pavement material characterization, the CORRECT statement(s) is/are
View Question The table shows the activities and their durations and dependencies in a project.table { width: 100%; border-collapse: c
View Question A partial differential equation$$\frac{\partial^2 T}{\partial x^2} + \frac{\partial^2 T}{\partial y^2} = 0$$is defined f
View Question The statements P and Q are related to matrices A and B, which are conformable for both addition and multiplication. P: $
View Question The second derivative of a function $f$ is computed using the fourth-order Central Divided Difference method with a step
View Question The function $f(x) = x^3 - 27x + 4$, $1 \leq x \leq 6$ has
View Question Consider two Ordinary Differential Equations (ODEs):P: $ \dfrac{dy}{dx} = \dfrac{x^4 + 3x^2 y^2 + 2y^4}{x^3 y} $Q: $ \df
View Question In a sample of 100 heart patients, each patient has 80% chance of having a heart attack without medicine X. It is clinic
View Question Three vectors $\overrightarrow{p}$, $\overrightarrow{q}$, and $\overrightarrow{r}$ are given as$ \overrightarrow{p} = \h
View Question The expression for computing the effective interest rate $(i_{eff})$ using continuous compounding for a nominal interest
View Question Consider two matrices $A = \begin{bmatrix}2 & 1 & 4 \\ 1 & 0 & 3\end{bmatrix}$ and $B = \begin{bmatrix}-1 & 0 \\ 2 & 3 \
View Question A 3 m long, horizontal, rigid, uniform beam PQ has negligible mass. The beam is subjected to a 3 kN concentrated vertica
View Question What is the CORRECT match between the air pollutants and treatment techniques given in the table?table { width: 100%; bo
View Question Which one of the following products is NOT obtained in anaerobic decomposition of glucose?
View Question A circular settling tank is to be designed for primary treatment of sewage at a flow rate of 10 million liters/day. Assu
View Question An organic waste is represented as C240O200H180N5S5.(Atomic weights: S-32, H-1, C-12, O-16, N-14).Assume complete conver
View Question The following figure shows a plot between shear stress and velocity gradient for materials/fluids P, Q, R, S, and T.Whic
View Question A 2 m wide rectangular channel is carrying a discharge of 30 m3/s at a bed slope of 1 in 300. Assuming the energy correc
View Question A round-bottom triangular lined canal is to be laid at a slope of 1 in 1500, to carry a discharge of 25 m3/s. The side s
View Question A hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gra
View Question A 500 m long water distribution pipeline P with diameter 1.0 m, is used to convey 0.1 m3/s of flow. A new pipeline Q, wi
View Question A 2 m × 1.5 m tank of 6 m height is provided with a 100 mm diameter orifice at the center of its base. The orifice is pl
View Question A rectangular channel is 4.0 m wide and carries a discharge of 2.0 m3/s with a depth of 0.4 m. The channel transitions t
View Question For a reconnaissance survey, it is necessary to obtain vertical aerial photographs of a terrain at an average scale of 1
View Question What is the CORRECT match between the survey instruments/parts of instruments shown in the table and the operations carr
View Question To finalize the direction of a survey, four surveyors set up a theodolite at a station P and performed all the temporary
View Question A child walks on a level surface from point P to point Q at a bearing of 30°, from point Q to point R at a bearing of 90
View Question Differential levelling is carried out from point P (BM: +200.000 m) to point R. The readings taken are given in the tabl
View Question The contact pressure distribution shown in the figure belongs to a
View Question Which one of the following saturated fine-grained soils can attain a negative Skempton’s pore pressure coefficient (A)?
View Question A reinforced concrete pile of 10 m length and 0.7 m diameter is embedded in a saturated pure clay with unit cohesion of
View Question Consider the statements P and Q related to the analysis/design of retaining walls.P: When a rough retaining wall moves t
View Question Consider the statements P, Q, and R. P: Compacted fine-grained soils with flocculated structure have isotropic permeabil
View Question A homogeneous earth dam has a maximum water head difference of 15 m between the upstream and downstream sides. A flownet
View Question The in-situ percentage of voids of a sand deposit is 50%. The maximum and minimum densities of sand determined from the
View Question A drained triaxial test was conducted on a saturated sand specimen using a stress-path triaxial testing system. The spec
View Question A storm with a recorded precipitation of 11.0 cm, as shown in the table, produced a direct run-off of 6.0 cm.
table {
View Question A simply supported, uniformly loaded, two-way slab panel is torsionally unrestrained. The effective span lengths along t
View Question A concrete column section of size 300 mm $\times$ 500 mm as shown in the figure is subjected to both axial compression a
View Question For a thin-walled section shown in the figure, points P, Q, and R are located on the major bending axis X−X of the secti
View Question The steel angle section shown in the figure has elastic section modulus of 150.92 cm3 about the horizontal X−X axis, whi
View Question A linearly elastic beam of length 2l with flexural rigidity EI has negligible mass. A massless spring with a spring cons
View Question A homogeneous, prismatic, linearly elastic steel bar fixed at both the ends has a slenderness ratio (l/r) of 105, where
View Question For the 6m long horizontal cantilever beam PQR shown in the figure, Q is the midpoint. Segment PQ of the beam has flexur
View Question The structural design method that DOES NOT take into account the safety factors on the design loads is
View Question The horizontal beam PQRS shown in the figure has a fixed support at point P, an internal hinge at point Q, and a pin sup
View Question The longitudinal sections of a runway have gradients as shown in the table.
table {
width: 100%;
border-co
View Question In general, the outer edge is raised above the inner edge in horizontal curves for
View Question Various stresses in jointed plain concrete pavement with slab size of 3.5 m × 4.5 m are denoted as follows: Wheel load s
View Question The consolidated data of a spot speed study for a certain stretch of a highway is given in the table.table { width: 100%
View Question A horizontal curve of radius 1080 m (with transition curves on either side) in a Broad Gauge railway track is designed a
View Question A vertical summit curve on a freight corridor is formed at the intersection of two gradients, +3.0% and −5.0%.Assume the
View Question General Aptitude
If '→' denotes increasing order of intensity, then the meaning of the words [drizzle → rain → downpour] is analogous to
View Question Statements:1. All heroes are winners.2. All winners are lucky people.Inferences:I. All lucky people are heroes.II. Some
View Question A student was supposed to multiply a positive real number $p$ with another positive real number $q$. Instead, the studen
View Question If the sum of the first 20 consecutive positive odd numbers is divided by $20^2$, the result is
View Question The ratio of the number of girls to boys in class VIII is the same as the ratio of the number of boys to girls in class
View Question In the given text, the blanks are numbered (i)–(iv). Select the best match for all the blanks.Yoko Roi stands _____ (i)
View Question Seven identical cylindrical chalk-sticks are fitted tightly in a cylindrical container. The figure below shows the arran
View Question The plot below shows the relationship between the mortality risk of cardiovascular disease and the number of steps a per
View Question Five cubes of identical size and another smaller cube are assembled as shown in Figure A. If viewed from direction X, th
View Question Visualize a cube that is held with one of the four body diagonals aligned to the vertical axis. Rotate the cube about th
View Question