1
GATE CE 2024 Set 2
MCQ (Single Correct Answer)
+2
-0.833

A round-bottom triangular lined canal is to be laid at a slope of 1 in 1500, to carry a discharge of 25 m3/s. The side slopes of the canal cross-section are to be kept at 1.25H : 1V. If Manning’s roughness coefficient is 0.013, the flow depth (in meters) will be in the range of

A

2.39 to 2.42

B

1.94 to 1.97

C

2.24 to 2.27

D

2.61 to 2.64

2
GATE CE 2024 Set 2
MCQ (Single Correct Answer)
+2
-0.833

A hypothetical multimedia filter, consisting of anthracite particles (specific gravity: 1.50), silica sand (specific gravity: 2.60), and ilmenite sand (specific gravity: 4.20), is to be designed for treating water/wastewater. After backwashing, the particles should settle forming three layers: coarse anthracite particles at the top of the bed, silica sand in the middle, and small ilmenite sand particles at the bottom of the bed.

Assume

(i) Slow discrete settling (Stoke’s law is applicable)

(ii) All particles are spherical

(iii) Diameter of silica sand particles is 0.20 mm

The CORRECT option fulfilling the diameter requirements for this filter media is

A

diameter of anthracite particles is slightly less than 0.35 mm and diameter of ilmenite particles is slightly greater than 0.141 mm.

B

diameter of anthracite particles is slightly greater than 0.35 mm and diameter of ilmenite particles is slightly less than 0.141 mm.

C

diameter of anthracite particles is slightly less than 0.64 mm and diameter of ilmenite particles is slightly less than 0.10 mm.

D

diameter of anthracite particles is slightly greater than 0.64 mm and diameter of ilmenite particles is slightly less than 0.10 mm.

3
GATE CE 2024 Set 2
Numerical
+2
-0.833

A 500 m long water distribution pipeline P with diameter 1.0 m, is used to convey 0.1 m3/s of flow. A new pipeline Q, with the same length and flow rate, is to replace P. The friction factors for P and Q are 0.04 and 0.01, respectively. The diameter of the pipeline Q (in meters) is ______________ (rounded off to 2 decimal places).

Your input ____
4
GATE CE 2024 Set 2
Numerical
+2
-0.833

A 2 m × 1.5 m tank of 6 m height is provided with a 100 mm diameter orifice at the center of its base. The orifice is plugged and the tank is filled up to 5 m height. Consider the average value of discharge coefficient as 0.6 and acceleration due to gravity (g) as 10 m/s2. After unplugging the orifice, the time (in seconds) taken for the water level to drop from 5 m to 3.5 m under free discharge condition is ______________ (rounded off to 2 decimal places).

Your input ____
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12