A bolted joint has four bolts arranged as shown in figure. The cross sectional area of each bolt is $$25\,m{m^2}.$$. A torque $$T = 200$$ $$N$$-$$m$$ is acting on the joint. Neglecting friction due to clamping force, maximum shear stress in a bolt is ______ $$MPa.$$

Which of the bearings given below SHOULD NOT be subjected to a thrust load?

Equal amounts of a liquid metal at the same temperature are poured into three moulds made of steel, copper and aluminum. The shape of the cavity is a cylinder with $$15$$ $$mm$$ diameter. The size of the moulds are such that the outside temper-ature of the moulds do not increase appreciably beyond the atmospheric temperature during solidification. The sequence of solidification in the mould from the fastest to slowest is

(Thermal conductivities of steel, copper and aluminum are $$60.5, 401$$ and $$237$$ $$W/m$$-$$K,$$ respectively. Specific heats of steel, copper and aluminum are $$434, 385$$ and $$903$$ $$J/kg$$-$$K,$$ respectively. Densities of steel, copper and aluminum are $$7854, 8933$$ and $$2700$$ $$kg/{m^3},$$ respectively.)

Engineering strain of a mild steel sample is recorded as $$0.100\% .$$ The true strain is