Most of the metal cutting heat goes into the

Calculate the $$MRR$$ and Specific cutting pressure for the following cutting conditions
Work material : steel,
Tool material : $$HSS,$$
Depth of cut : $$1.6mm,$$
Feed : $$0.8mm/rev$$
Cutting speed $$=5.5m/min$$ and power consumed $$=0.67$$ $$kW$$

Determine the Merchants constant $$'C'$$ (shear angle relation) for aluminium from the following orthogonal machining data. Rake angle $${35^ \circ }$$ and an uncut chip thickness $$0.15mm,$$ the values of $${F_c}$$ and $${F_t}$$ are found to be $$200$$ and $$90$$ $$N$$ respectively. The average chip thickness is also measured and found to be $$0.3$$ $$mm,$$ width of cut $$2.5mm$$ and cutting velocity $$30m/min.$$