An $$RC$$ square footing of side length $$2$$ $$m$$ and uniform effective depth $$200$$ $$mm$$ is provided for a $$300$$ $$mm \times 300\,mm$$ column. The line of action of the vertical compressive load passes through the centroid of the footing as well as of the column. If the magnitude of the load is $$320$$ $$kN,$$ the nominal transverse (one way) shear stress in the footing is

A simply supported prestressed concrete beam is $$6$$ $$m$$ long and $$300$$ $$mm$$ wide. Its gross depth is $$600$$ $$mm.$$ It is prestressed by horizontal cable tendons at a uniform eccentricity of $$100$$ $$mm.$$ The prestressing tensile force in the cable tendons is $$1000$$ $$kN$$. Neglect the self weight of beam. The maximum normal compressive stress in the beam at transfer is

Two equal angles $$ISA$$ $$100\,\,mm \times 100\,\,mm$$ of thickness $$10$$ $$mm$$ are placed back-to-back and connected to the either side of a gusset plate through a single row of $$16$$ $$mm$$ diameter rivets in double shear. The effective areas of the connected and unconnected legs of each of these angles are $$775$$ $$m{m^2}$$ and $$950$$ $$m{m^2},$$ respectively. If these angles are NOT Tack riveted, the net effective area of this pair of angle is

A moment $$M$$ of magnitude $$50$$ $$kN$$-$$m$$ is transmitted to a column flange through a bracket by using four $$20$$ $$mm$$ diameter rivets as shown in the figure. The shear force induced in the rivet $$A$$ is