A slider-crank mechanism with crank radius $$60$$mm and connecting rod length $$240$$mm is shown in figure. The crank is rotating with a uniform angular speed of $$10$$ rad/s, counter clockwise. For the given configuration, the speed (in m/s) of the slider is ____________.

An offset slider - crank mechanism is shown in the figure at an instant. Conventionally, the Quick Return Ratio (QRR) is considered to be greater than one. The value of QRR is _______

Which one of the following is used to convert a rotational motion into a translational motion?

Gear 2 rotates at 1200 rpm in counter clockwise direction and engages with Gear 3. Gear 3 and Gear 4 are mounted on the same shaft. Gear 5 engages with Gear 4. The numbers of teeth on Gears 2, 3, 4 and 5 are 20, 40, 15 and 30, respectively. The angular speed of Gear 5 is