Beam $$GHI$$ is supported by these pontoons as shown in the figure below. The horizontal cross sectional area of each pontoon is $$8\,\,{m^2},$$ the flexural rigidity of the beam is $$10000$$ $$kN$$-$${m^2}$$ and the unit weight of water is $$10$$ $$kN$$/$${m^3}$$.

When the middle pontoon is removed, the deflection at $$H$$ will be

Cross-section of a column consisting of two steel strips, each of thickness $$t$$ and width $$b$$ is shown in the figure below. The critical loads of the column with perfect bond and without bond between the strips are $$P$$ and $${P_0}$$ respectively. The ratio $$P/{P_0}$$ is

A rigid bar $$GH$$ of length $$L$$ is supported by a hinge and a spring of stiffness $$K$$ as shown in the figure below. The buckling load, $${P_{cr}}'$$ for the bar will be

A mild steel specimen is under uniaxial tensile stress. Young's modulus and yield stress for mild steel are $$2 \times {10^5}\,\,MPa$$ and $$250$$ $$MPa$$ respectively. The maximum amount of strain energy per unit volume that can be stored in this specimen without permanent set is