A mild steel specimen is under uniaxial tensile stress. Young's modulus and yield stress for mild steel are $$2 \times {10^5}\,\,MPa$$ and $$250$$ $$MPa$$ respectively. The maximum amount of strain energy per unit volume that can be stored in this specimen without permanent set is

A thin walled cylindrical pressure vessel having a radius of $$0.5$$ $$m$$ and wall thickness of $$25$$ $$mm$$ is subjected to an internal pressure of $$700$$ $$kPa$$. The hoop stress developed is

Beam $$GHI$$ is supported by these pontoons as shown in the figure below. The horizontal cross sectional area of each pontoon is $$8\,\,{m^2},$$ the flexural rigidity of the beam is $$10000$$ $$kN$$-$${m^2}$$ and the unit weight of water is $$10$$ $$kN$$/$${m^3}$$.

When the middle pontoon is removed, the deflection at $$H$$ will be

The maximum shear stress in a solid shaft of circular cross-section having diameter subjected to a torque $$T$$ is $$\tau $$ . If the torque is increased by four times and the diameter of the shaft is increased by two times, the maximum shear stress in the shaft will be