A level having $${90^0}$$ bend is to be produced by drop forging using mild steel bar as raw material. The various operations to be performed on it during forging are:
$$P$$ - Cutting;
$$Q$$ - Bending;
$$R$$ - Fullering;
$$S$$ - Blocking cum finishing;
$$T$$ - Edgering

The correct sequence for performing the operations is:

Flash and gutter are provided in drop forging dies at the following stage:

Cold shut (lap) may occur in products obtained by:

A cylindrical pin of diameter $${1.996^{\matrix{ { + 0.0015} \cr { - 0.0015} \cr } }}\,\,mm$$ is assembled into a hole of diameter $${2.000^{\matrix{ { + 0.0015} \cr { - 0.0015} \cr } }}\,\,mm.$$ The allowance (in $$mm$$) provided for this assembly is