The height of the down sprue is $$175$$ $$mm$$ and its $$CS$$ area at the base is $$200\,\,m{m^2}.$$ The $$CS$$ area of

The permeability of molding sand was determined using a saturated $$AFS$$ sample by passing $$2000cc$$ of air at a gage

Proper gating design in metal casting $$P:$$ Influences the freezing range of the melt $$Q:$$ Compensates the loss of

A $$10$$ $$mm$$ thick steel bar is to be horizontally cast with two correctly spaced top risers of adequate feeding capa

In spot pulsed laser welding of aluminium plates (density $$ = 2700kg/{m^3},$$ specific heat $$=896J/kg,$$ melting temp

Two different tools $$A$$ and $$B$$ having nose radius of $$0.6mm$$ and $$0.33mm$$ respectively are used to machine $$C-

A cutting tool is designated in 'Orthogonal Rake System' as: $$${0^ \circ } - {0^ \circ } - {6^ \circ } - {6^ \circ } -

A $$31.8MM$$ $$HSS$$ drill is used to drill a hole in cast iron block $$100$$ $$mm$$ thick at cutting speed of $$n20m/mi

Match GROUP - I with GROUP - II

A side and face cutter $$125mm$$ diameter has $$10$$ teeth. It operates at a cutting speed of $$14m/min$$ with a table t

A cup of $$10$$ $$cm$$ height and $$5$$ $$cm$$ diameter is to be made from a sheet metal of $$2mm$$ thickness. The numbe

In sheet metal working, the spring back increase when $$P:$$ Ratio of bend radius to sheet thickness is small $$Q:$$ Yo