1
GATE CE 2025 Set 2
Numerical
+2
-0

A 60 cm diameter well completely penetrates a confined aquifer of permeability $5 \times 10^{-4} \mathrm{~m} / \mathrm{s}$. The length of the strainer (spanning the entire thickness of the aquifer) is 10 m . The drawdown at the well under steady state pumping is 1.0 m . Assume that the radius of influence for this pumping is 300 m .

The discharge from the well (in litres per minute) is ________ (round off to the nearest integer).

Your input ____
2
GATE CE 2025 Set 2
Numerical
+2
-0

The peak of flood hydrograph due to a 3 -hour duration storm in a catchment is $180 \mathrm{~m}^3 / \mathrm{s}$. The total rainfall depth is 6.6 cm . It can be assumed that the average infiltration loss is $0.2 \mathrm{~cm} / \mathrm{h}$. There are no other losses. The base flow is constant at a value of $30 \mathrm{~m}^3 / \mathrm{s}$.

The peak value of the 3-hour unit hydrograph for this catchment (in $\mathrm{m}^3 / \mathrm{s}$ ) is ________ (round off to the nearest integer).

Your input ____
3
GATE CE 2025 Set 2
MCQ (More than One Correct Answer)
+1
-0
Pick one or more CORRECT statement(s) from the choices given below, in the context of upstream and downstream cut-offs provided below the concrete apron of weirs/barrages constructed across alluvial rivers.
A
Cut-offs are provided to increase the rate of flow over the weir / barrage.
B
Cut-offs are provided to increase the seepage length and prevent failure due to piping.
C
The bottom level of cut-offs mainly depends on the scour depth.
D
Cut-offs are provided to ensure occurrence of hydraulic jump within the stilling basin.
4
GATE CE 2025 Set 2
MCQ (More than One Correct Answer)
+1
-0

In the context of construction materials, which of the following statements is/are CORRECT?

A
If the characteristic strength is defined as that value below which not more than $50 \%$ results are expected to fall, the target mean strength in mix design will be taken same as the characteristic strength irrespective of the degree of quality control expected at the site.
B
Ten percent fines value is a non-dimensional quantity.
C
The stress-strain curve of concrete for 1-day duration of loading is associated with a smaller secant modulus of elasticity compared to the stress-strain curve of the same concrete for 10-minutes duration of loading.
D
The increase of carbon in steel usually leads to an increase in its $0.2 \%$ proof stress.
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12