GATE CE 2017 Set 2

## GATE CE

Given that the scope of the construction work is well-defined with all its drawings,
specifications, quantities and esti

View Question Consider the following statements:
P. Walls of one brick thick are measured in square meters.
Q. Walls of one brick thic

View Question For a construction project. The mean and standard deviation of the completion time are 200
days and 6.1 days, respective

View Question If $$A = \left[ {\matrix{
1 & 5 \cr
6 & 2 \cr
} } \right]\,\,and\,\,B = \left[ {\matrix{
3 &

View Question Consider the following simultaneous equations (with $${c_1}$$ and $${c_2}$$ being constants):
$$$3{x_1} + 2{x_2} = {c_1

View Question Let $$\,\,W = f\left( {x,y} \right),\,\,$$ where $$x$$ and $$y$$ are functions of $$t.$$ Then, according to the chain ru

View Question The tangent to the curve represented by $$y=x$$ $$ln$$ $$x$$ is required to have $${45^ \circ }$$ inclination with the $

View Question Consider the following definite integral
$$${\rm I} = \int\limits_0^1 {{{{{\left( {{{\sin }^{ - 1}}x} \right)}^2}} \ove

View Question The divergence of the vector field $$\,V = {x^2}i + 2{y^3}j + {z^4}k\,\,$$ at $$x=1, y=2, z=3$$ is ________.

View Question A two-faced fair coin has its faces designated as head $$(H)$$ and tail $$(T)$$. This coin is tossed three times in succ

View Question The analysis of a water sample produces the following results:
The total hardness (in mg/L as $${\mathrm{CaCO}}_3$$) of

View Question The figure shows a U-tube having a 5 mm × 5 mm square cross-section filled with mercury
(specific gravity = 13.6) up to

View Question A catchment is idealized as a 25 km × 25 km square. It has five rain gauges, one at each
corner and one at the center, a

View Question The culturable command area of a canal is 10,000 ha. The area grows only two crops-rice in
the Kharif season and wheat i

View Question Let the characteristic strength be defined as that value, below which not more than 50% of the
results are expected to f

View Question A simply supported rectangular concrete beam of span $$8$$ $$m$$ has to be prestressed with a force of $$1600$$ $$kN.$$

View Question Two plates of $$8$$ $$mm$$ thickness each are connected by a fillet weld of $$6$$ $$mm$$ thickness as shown in the figur

View Question In a material under a state of plane strain, a 10×10 mm square centered at a point gets
deformed as shown in the figure.

View Question Consider the three prismatic beams with the clamped supports $$P,Q$$ and $$R$$ as shown in the figures.
Given that the

View Question A hollow circular shaft has an outer diameter of $$100$$ $$mm$$ and inner diameter of $$50mm.$$ If the allowable shear s

View Question Two prismatic beams having the same flexural rigidity of $$1000\,kN$$-$${m^2}$$ are shown in the figures.
If the mid-s

View Question Consider the frame shown in the figure.
If the axial and shear deformations in different members of the frame are assu

View Question Consider the portal frame shown in the figure and assume the modulus of elasticity, $$E = \,2.5 \times {10^4}\,\,MPa$$ a

View Question While aligning a hill road with a ruling gradient of 6%, a horizontal curve of radius 50 m is encountered. The grade com

View Question