A simply supported rectangular prestressed concrete beam $$200$$ $$mm$$ wide and $$400$$ $$mm$$ deep has an effective span of $$12$$ $$m.$$ The prestressing cable has a triangular profile with zero eccentricity at ends and $$70$$ $$mm$$ at the midspan as shown in the figure below. The effective prestress is $$800$$ $$kN$$ after all losses. Determine the value of point load, the beam can support at the midspan if the pressure line passes through the upper kern of the section. The weight density of the material of the beam can be taken to be $$25$$ $$kN/{m^3}$$

A $$12$$ $$mm$$ bracket plate is connected to a column flange as shown in the figure below. The bracket transmits a load of $$W = 200\,\,kN$$ to the column flange. $$A$$ $$10$$ $$mm$$ fillet weld is provided along $$AB,$$ $$BC$$ and $$CD.$$ If $$e=350$$ $$mm,$$ $$b=200$$ $$mm$$ and $$d=600$$ $$mm,$$ Verify if the size of the weld provided is adequate. Allowable shearing stress in the fillet weld can be taken to be $$108$$ $$MPa.$$

The stress-strain diagram for two materials A and B is shown below: The following statements are made based on this diagram:
I. Material A is more brittle than material B.
II. The ultimate strength of material B is more than that of A.
With reference to the above statements, which of the following applies?

Pick the incorrect statement from the following four statements: