GATE CE 2011 | GATE CE Year Wise Previous Years Questions

GATE CE 2011

MCQ (Single Correct Answer)

-0.6

The adjoining figure shows a schematic representation of a steel plate girder to be used as a simply supported beam with a concentrated load. For stiffeners, $$PQ$$ (running along the beam axis) and $$RS$$ (running between the top and bottom flanges) which of the following pairs of statements will be TRUE? GATE CE 2011 Steel Structures - Plate Girder Question 2 English

GATE CE 2011 Steel Structures - Plate Girder Question 2 English

$$(i)$$$$\,\,\,\,$$ $$RS$$ should be provided under the concentrated load only
$$(ii)$$$$\,\,\,\,$$ $$PQ$$ should be placed in the tension side of the flange.

$$(i)$$$$\,\,\,\,$$ $$RS$$ helps to prevent local buckling of the web.
$$(ii)$$$$\,\,\,\,$$ $$PQ$$ should be placed in the compression side of the flange.

$$(i)$$$$\,\,\,\,$$ $$RS$$ should be provided at supports
$$(ii)$$$$\,\,\,\,$$ $$PQ$$ should be placed along the neutral axis

$$(i)$$$$\,\,\,\,$$ $$RS$$ should be provided away from points of action of concentrated loads.
$$(ii)$$$$\,\,\,\,$$ $$PQ$$ should be provided on the compression side of the flange.

GATE CE 2011

MCQ (Single Correct Answer)

-0.3

For the fillet weld of size $$'S'$$ shown in the adjoining figure the effective throat thickness is GATE CE 2011 Steel Structures - Welded Connections Question 4 English

GATE CE 2011 Steel Structures - Welded Connections Question 4 English

$$0.61$$ $$S$$

$$0.65$$ $$S$$

$$0.70$$ $$S$$

$$0.75$$ $$S$$

GATE CE 2011

MCQ (Single Correct Answer)

-0.6

For the cantilever bracket, $$PQRS,$$ loaded as shown in the adjoining figure $$(PQ=RS=L,$$ and $$QR=2L),$$ which of the following statements is FALSE ? GATE CE 2011 Strength of Materials Or Solid Mechanics - Torsion Question 5 English

GATE CE 2011 Strength of Materials Or Solid Mechanics - Torsion Question 5 English

The portion $$RS$$ has a constant twisting moment with a value of $$2WL.$$

The portion $$QR$$ has a varying twisting moment with a maximum value of $$WL.$$

The portion $$PQ$$ has a varying bending moment with a maximum value of $$WL$$.

The portion $$PQ$$ has no twisting moment.

GATE CE 2011

MCQ (Single Correct Answer)

-0.6

A disc of radius $$'r'$$ has a hole of radius $$'r/2'$$ cut-out as shown. The centroid of the remaining disc (shaded portion) at a radial distance from the center $$''O''$$ is GATE CE 2011 Strength of Materials Or Solid Mechanics - Centroid and Moment of Inertia Question 5 English

GATE CE 2011 Strength of Materials Or Solid Mechanics - Centroid and Moment of Inertia Question 5 English

$${\pi \over 2}$$

$${\pi \over 3}$$

$${\pi \over 6}$$

$${\pi \over 8}$$

PREVIOUS NEXT

GATE CE Papers

2024