GATE CE 1990 | GATE CE Year Wise Previous Years Questions

PREVIOUS NEXT

GATE CE 1990

MCQ (Single Correct Answer)

-0.3

Tensile strength of cement mortar is usually found by:

Briquette test

Slump test

Vicat needle test

Split cylinder test

GATE CE 1990

MCQ (Single Correct Answer)

-0.3

The modulus of elasticity of concrete mix M25 is

25,000 N/mm²

28,500 N/mm²

15,000 N/mm²

5,700 N/mm²

GATE CE 1990

MCQ (Single Correct Answer)

-0.6

A rectangular simply supported prestressed concrete beam of span $$L$$ is subjected to a prestressing force of $$P$$ acting centrally at end sections and the prestress tendons are parabolically draped with maximum eccentricity of $${e_{\max }}$$ at the mid span section. The uniformly distributed upward load $$(W)$$ on the beam due to prestressing will be:

$$16\,\,P\,{e_{\max }}/{L^2}$$

$$4\,\,P\,{e_{\max }}/{L^2}$$

$$12\,\,P\,{e_{\max }}/{L^2}$$

$$8\,\,P\,{e_{\max }}/{L^2}$$

GATE CE 1990

MCQ (Single Correct Answer)

-0.3

The principle of superposition is made use of in structural computations when:

The geometry of the structure changes by a finite amount during the application of the loads.

The changes in the geometry of the structure during the application if the loads is too small and the strain in the structure are directly proportional to the corresponding stresses.

The strains in the structure are not directly proportional to the corresponding stresses, even though the effect of changes in geometry can be neglected.

None of the above conditions are met.

PREVIOUS NEXT

GATE CE Papers

2024