The extrusion process(es) used for the production of toothpaste tubes is / are

$$1.$$ Tube extrusion
$$2.$$ Forward extrusion
$$3.$$ Impact extrusion

Consider the following steps in forging a connecting rod from the bar stock

$$1.$$ blocking $$\,\,\,\,\,\,\,\,\,$$ $$\,\,\,\,\,\,\,\,\,$$ $$\,\,\,\,\,\,\,\,\,$$$$2.$$ trimming
$$3.$$ finishing$$\,\,\,\,\,\,\,\,\,$$ $$\,\,\,\,\,\,\,\,\,$$ $$\,\,\,\,\,\,\,\,\,$$ $$4.$$ edging

Select the correct sequence of these operations using the codes given below

Cold working produces the following effects

$$1.$$$$\,\,\,\,\,\,\,\,\,\,\,\,\,\,$$ Stress are set up in the material
$$2.$$$$\,\,\,\,\,\,\,\,\,\,\,\,\,\,$$ Grain structure get distorted
$$3.$$$$\,\,\,\,\,\,\,\,\,\,\,\,\,\,$$ Strength and hardness of the metal are decreased
$$4.$$$$\,\,\,\,\,\,\,\,\,\,\,\,\,\,$$ Surface finish is reduced

An annealed copper wire of $$25 mm$$ diameter is drawn into a wire of $$5$$ $$mm$$ dia. The average yield stress in this operation if the flow curve of the material is given
$$\sigma = 315{ \in ^{0.54}}\,MPa$$