An annealed copper wire of $$25 mm$$ diameter is drawn into a wire of $$5$$ $$mm$$ dia. The average yield stress in this operation if the flow curve of the material is given
$$\sigma = 315{ \in ^{0.54}}\,MPa$$

To stress relive a cold worked steel part, it is heated to a temp close to ..... A....... and grains obtained after cooling are........ B.........
A. Lower critical temp/ upper critical temp
B. Fine / coarser

If the elongation factor during rolling of an ingot is $$1.22.$$ The minimum number of passes needed to produce a section $$250 \times 250\,\,mm$$ from an ingot of $$750 \times 750\,\,mm$$ are