A $$10mm$$ diameter annealed steel wire is drawn through a die at a speed of $$0.5/sec$$ to reduce the diameter by $$20\% $$. The yield stress of the material is $$800MPa.$$

The power required for the drawing process (in $$kW$$ ) is

In a rolling process, thickness of a strip is reduced from $$4mm$$ to $$3mm$$ using $$300mm$$ diameter rolls rotating at $$100rpm.$$ The velocity of the strip (in $$m/sec$$) at the neutral point is

A $$10mm$$ diameter annealed steel wire is drawn through a die at a speed of $$0.5/sec$$ to reduce the diameter by $$20\% $$. The yield stress of the material is $$800MPa.$$

Neglecting friction and strain hardening, the stress required for drawing (in $$MPa$$) is

The maximum possible percentage reduction in area per pass during wire drawing of an ideal plastic material without friction is of the order of