1
GATE PI 2004
MCQ (Single Correct Answer)
+2
-0.6
In an interchangeable assembly, a shaft of $${20.00^{\matrix{
{ - 0.015} \cr
{ - 0.005} \cr
} }}\,\,mm$$ diameter and a hole of $${20.00^{\matrix{
{ - 0.025} \cr
{ - 0.010} \cr
} }}\,\,mm$$ diameter form a mating pair. In the worst assembly conditions, the clearance between them will be
2
GATE PI 1995
Fill in the Blanks
+2
-0
The least count of a $$200$$ $$mm$$ long spirit level is given as $$10$$ seconds per division. The gradient of the spirit level expressed as $$mm$$ over one meter is _____________.
3
GATE PI 1995
Fill in the Blanks
+2
-0
The diameter of a hole is given as $${50^{\matrix{
{ + 0.15} \cr
{ + 0.00} \cr
} }}\,\,mm.$$ The upper limit on the dimension in $$mm,$$ of the shaft for achieving maximum interference of $$50micron$$ is .................
4
GATE PI 1994
Fill in the Blanks
+2
-0
A hole is specified as $$\phi 30 \pm 0.04mm$$ with $$\phi \,\,0.01\,\,M.$$ The virtual diameter of the hole (i.e the maximum diameter of the pin that can enter the hole ) is ________________
Questions Asked from Metrology and Inspection (Marks 2)
Number in Brackets after Paper Indicates No. of Questions
GATE PI 2015 (2)
GATE PI 2014 (1)
GATE PI 2013 (1)
GATE PI 2012 (1)
GATE PI 2011 (2)
GATE PI 2010 (1)
GATE PI 2009 (2)
GATE PI 2008 (2)
GATE PI 2007 (2)
GATE PI 2006 (2)
GATE PI 2005 (1)
GATE PI 2004 (1)
GATE PI 1995 (2)
GATE PI 1994 (1)
GATE PI 1993 (2)
GATE PI 1992 (2)
GATE PI 1991 (1)
GATE PI 1990 (1)
GATE PI 1989 (1)
GATE PI Subjects
Fluid Mechanics
Metrology
Theory of Machines
Engineering Mathematics
Machine Tools and Machining
Industrial Engineering
Engineering Mechanics
Strength of Materials
Thermodynamics
Machine Design
Casting
Joining of Materials
Metal Forming