The $$DC$$ power source for arc welding has the characteristic $$3V + 1 = 240,$$ where $$V=$$ Voltage and $${\rm I}\,\, = $$ current in amp. For maximum arc power at the electrode, voltage should be set at

In an orthogonal cutting test, the following observations were made
Cutting force $$=1200N ;$$ Thrust force $$=500N$$
Tool rake angle $$=zero ;$$ Cutting speed $$=1$$ $$m/s,$$
Depth of cut $$=0.8mm;$$
Chip thickness $$=1.5$$ $$mm$$

Friction angle during machining will be

In an orthogonal cutting test, the following observations were made
Cutting force $$=1200N ;$$ Thrust force $$=500N$$
Tool rake angle $$=zero ;$$ Cutting speed $$=1$$ $$m/s,$$
Depth of cut $$=0.8mm;$$
Chip thickness $$=1.5$$ $$mm$$

Chip speed along the tool rake face will be

Reaming is primarily used for achieving