Blind hole $$10mm$$ diameter, $$50mm$$ deep are being drilled in steel block, drilling spindle speed is $$600rpm$$, feed $$0.2$$$$mm/rev,$$ point angle of drill is $$120.$$

Machining time (in min) per hole will be

Reaming is primarily used for achieving

Which of following gear manufacturing processes is based on generation principle.

In an orthogonal cutting test, the following observations were made
Cutting force $$=1200N ;$$ Thrust force $$=500N$$
Tool rake angle $$=zero ;$$ Cutting speed $$=1$$ $$m/s,$$
Depth of cut $$=0.8mm;$$
Chip thickness $$=1.5$$ $$mm$$

Chip speed along the tool rake face will be