Which of following gear manufacturing processes is based on generation principle.

In an orthogonal cutting test, the following observations were made
Cutting force $$=1200N ;$$ Thrust force $$=500N$$
Tool rake angle $$=zero ;$$ Cutting speed $$=1$$ $$m/s,$$
Depth of cut $$=0.8mm;$$
Chip thickness $$=1.5$$ $$mm$$

Chip speed along the tool rake face will be

In an orthogonal cutting test, the following observations were made
Cutting force $$=1200N ;$$ Thrust force $$=500N$$
Tool rake angle $$=zero ;$$ Cutting speed $$=1$$ $$m/s,$$
Depth of cut $$=0.8mm;$$
Chip thickness $$=1.5$$ $$mm$$

Friction angle during machining will be

Circular blanks of $$35$$ $$mm$$ diameter are punched from a steel sheet of $$2$$ $$mm$$ thickness. If the clearance per side between the punch and die is to be kept as $$40$$ microns, the sizes of punch and die should respectively be.