1
GATE PI 1994
MCQ (Single Correct Answer)
+5
-1.5
In an orthogonal cutting operation, the cutting velocity is $$30$$ $$m/min$$ and the chip velocity $$15$$ $$m/min.$$ If the rake angle of the tool is $${10^0}$$.

Shear velocity with the help of a velocity triangle.

A
$$7.5$$ $$m/min$$
B
$$12$$ $$m/min$$
C
$$25$$ $$m/min$$
D
$$31$$ $$m/min$$
2
GATE PI 1994
MCQ (Single Correct Answer)
+5
-1.5
In an orthogonal cutting operation,
The depth of cut $$=2$$ $$mm,$$
Width of cut $$=15$$ $$mm,$$
Cutting speed $$=0.5$$ $$m/s$$ and
The rake angle $$=0$$ deg.
The cutting force and the thrust force are respectively $$900$$ $$N$$ and $$600$$ $$N$$ and the shear angle $$=30$$ $$deg$$.

The average coefficient of friction between the chip and the tool is

A
$$1/3$$
B
$$3/5$$
C
$$2/3$$
D
none
3
GATE PI 1994
MCQ (Single Correct Answer)
+5
-1.5
In an orthogonal cutting operation,
The depth of cut $$=2$$ $$mm,$$
Width of cut $$=15$$ $$mm,$$
Cutting speed $$=0.5$$ $$m/s$$ and
The rake angle $$=0$$ deg.
The cutting force and the thrust force are respectively $$900$$ $$N$$ and $$600$$ $$N$$ and the shear angle $$=30$$ $$deg$$.

The cutting power in watts is

A
$$300$$
B
$$450$$
C
$$600$$
D
$$750$$
4
GATE PI 1994
MCQ (Single Correct Answer)
+5
-1.5
In an orthogonal cutting operation,
The depth of cut $$=2$$ $$mm,$$
Width of cut $$=15$$ $$mm,$$
Cutting speed $$=0.5$$ $$m/s$$ and
The rake angle $$=0$$ deg.
The cutting force and the thrust force are respectively $$900$$ $$N$$ and $$600$$ $$N$$ and the shear angle $$=30$$ $$deg$$.

The length of the shear plane is

A
$$30mm$$
B
$$15mm$$
C
$$10mm$$
D
$$4mm$$
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12