A $$60deg$$ symmetrical $$V$$ tool is used in shaping a work piece with a depth of cut of $$0.1$$$$mm$$ and feed of $$0.1mm/stroke$$. The theoretical peak to valley height, in $$mm,$$ of the surface produced is

The heat generated in metal cutting is dissipated in different proportions into environment, tool, chip and work-piece. The correct order of this proportion in decreasing magnitude is (no cutting fluid is use ($$d$$)

In a cutting test with $$0.3mm$$ flank wear as tool failure criterion, a tool life of $$10min$$ was obtained at a cutting velocity of $$20m/min.$$ Taking tool life exponrent as $$0.25,$$ the tool life in minutes at $$40m/min$$ of cutting velocity will be

A single point cutting tool with $${12^0}$$ rake angle is used for orthogonal machining of a ductile material. The shear plane angle for the theoretically minimum possible shear strain to occur