1
GATE PI 2011
MCQ (Single Correct Answer)
+2
-0.6
If a matrix $$A = \left[ {\matrix{ 2 & 4 \cr 1 & 3 \cr } } \right]$$ and matrix $$B = \left[ {\matrix{ 4 & 6 \cr 5 & 9 \cr } } \right]$$ the transpose of product of these two matrices i.e., $${\left( {AB} \right)^T}$$ is equal to
A
$$\left[ {\matrix{ {28} & {19} \cr {34} & {47} \cr } } \right]$$
B
$$\left[ {\matrix{ {19} & {34} \cr {47} & {28} \cr } } \right]$$
C
$$\left[ {\matrix{ {48} & {33} \cr {28} & {19} \cr } } \right]$$
D
$$\left[ {\matrix{ {28} & {19} \cr {48} & {33} \cr } } \right]$$
2
GATE PI 2011
MCQ (Single Correct Answer)
+2
-0.6
Water is flowing through a horizontal pipe of constant diameter and the flow is laminar. If the diameter of the pipe is increased by $$50\% $$ keeping the volume flow rate constant, then the pressure drop in the pipe due to friction will decrease by
A
$$33\% $$
B
$$50\% $$
C
$$70\% $$
D
$$80\% $$
3
GATE PI 2011
MCQ (Single Correct Answer)
+2
-0.6
Cold water flowing at $$0.1$$ $$kg/s$$ is heated from $${20^ \circ }C$$ to $${70^ \circ }C$$ in a counter-flow type heat exchanger by a hot water stream flowing at $$0.1$$ $$kg/s$$ and entering at $${90^ \circ }C$$. The specific heat of water is $$4200$$ $$J$$($$kg$$ $$K$$) and density is $$1000$$ $$kg/{m^3}.$$ If the overall heat transfer coefficient $$U$$ for the heat exchanger is $$2000$$ $$W/\,\,\left( {{m^2}\,\,K} \right),$$ the required heat exchange area (in $${{m^2}}$$) is
A
$$0.052$$
B
$$0.525$$
C
$$0.151$$
D
$$0.202$$
4
GATE PI 2011
MCQ (Single Correct Answer)
+1
-0.3
Which of the following welding process results in the smallest heat affected zone
A
Shielded metal arc welding
B
Gas welding
C
Laser beam welding
D
Thermit welding
EXAM MAP