In a surface broaching process, a broach having $$5mm$$ pitch and cut per teeth $$0.05mm$$ is used for reducing the thickness by $$6mm.$$ If the length of the work piece is $$50mm$$ and the cutting speed is $$0.05m/s,$$ the time required / pass in seconds is

It is required to punch a hole of diameter $$10mm$$ on a sheet of thickness $$3mm.$$ The shear strength of the work material is $$420Mpa.$$ The required punch force is

A work piece of $$1000$$ $$mm$$ length and $$300$$ $$mm$$ width is machined by planning operation with a feed of $$0.3$$ $$mm/stroke.$$ The machine tool executes $$10$$ double strokes per minute. The planning time for a single pass is

It is required to punch a hole of diameter $$10mm$$ on a sheet of thickness $$3mm.$$ The shear strength of the work material is $$420MPa.$$ The required punch force is