In a $$CNC$$ feed drive, a stepper motor with step angle of $$1.8deg$$ drives a lead screw with pitch of $$2mm.$$ The basic length unit $$(BLU)$$ for this drive is

Suppose point $$P1$$ in $$APT$$ (Automatically programmed Tool) programming is coded by statement
$$P1 = POINT/XSMALL,\,\,\,INTOF,\,\,\,LN1,\,\,CR1$$

The coded geometric situation without causing error is

A stepper motor has $$150$$ steps. The output shaft of the motor is directly coupled to a lead screw of pitch $$4mm,$$ which drives a table. If the frequency of pulse supply to the motor is $$200Hz$$, the speed of the table (in $$mm/min)$$ is

The geometric transformation specified by

$$\left[ {x'\,\,y'\,\,1} \right] = \left[ {x\,\,y\,\,1} \right]\left[ {\matrix{ {0.5} & 0 & 0 \cr 0 & {0.25} & 0 \cr 1 & 2 & 1 \cr } } \right]$$ in a $$2D.$$
In a $$2D$$ $$CAD$$ system represents................