1
GATE PI 2010
MCQ (Single Correct Answer)
+2
-0.6
For a $$3$$-axes $$CNC$$ table, the slide along the vertical axis of the table driven by a $$DC$$ servo motor via lead screw nut mechanism. The lead screw has a pitch of $$5mm.$$ This lead screw is fitted with a relative (incremental) circular encoder. The basic length unit $$(BLU)$$ of the slide along the vertical axis of the table is $$0.005mm.$$ When the table moves along the vertical axis by $$9mm.$$ The corresponding number of pulses generated by the encounter is
A
$$1400$$
B
$$1800$$
C
$$4200$$
D
$$9000$$
2
GATE PI 2009
MCQ (Single Correct Answer)
+2
-0.6
The total angular movement (in degrees) of a lead screw with a pitch of $$5.0mm$$ to drive the work table by a distance of $$200mm$$ in a $$NC$$ machine is
A
$$14400$$
B
$$28800$$
C
$$57600$$
D
$$72000$$
3
GATE PI 2009
MCQ (Single Correct Answer)
+2
-0.6
A titanium sheet of $$5.0mm$$ thickness is cut by wire cut $$EDM$$ process using a wire of $$1.0mm$$ diameter. A uniform spark gap of $$0.5mm$$ on both sides of the wire is maintained during cutting operation. If the feed rate of the wire into the sheet is $$20mm/min,$$ the material removal rate (in $$m{m^3}/\min $$) will be
A
$$150$$
B
$$200$$
C
$$300$$
D
$$400$$
4
GATE PI 2008
MCQ (Single Correct Answer)
+2
-0.6
In a $$CNC$$ feed drive, a stepper motor with step angle of $$1.8deg$$ drives a lead screw with pitch of $$2mm.$$ The basic length unit $$(BLU)$$ for this drive is
A
$$10$$ microns
B
$$20$$ microns
C
$$40$$ microns
D
$$100$$ microns
EXAM MAP
Medical
NEETAIIMS
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
Civil Services
UPSC Civil Service
Defence
NDA
Staff Selection Commission
SSC CGL Tier I
CBSE
Class 12