The length of four wires $A, B, C$ and $D$ made of same materials are $1 \mathrm{~m}, 2 \mathrm{~m}, 3 \mathrm{~m}$ and 4 m respectively. The radii of the wires $A, B, C$ and $D$ are $0.2 \mathrm{~mm}, 0.4 \mathrm{~mm}$, 0.6 mm and 0.8 mm respectively. For the same applied tension, the elongation is more in the wire
A liquid is taken in a long vertical cylindrical vessel and the cylinder is rotated about its vertical axis as shown in figure. During rotation, the liquid rises along its sides. If the radius of vessel is 0.05 m and speed of rotation is $10 \mathrm{rads}^{-1}$, then the height difference between the liquid at the centre of the vessel and its sides is $\left(g=10 \mathrm{~ms}^{-2}\right)$

A vessel having small hole in the bottom has to hold water without leakage, if water is poured into if upto a height of 7 cm . Then the radius of the hole is (surface tension of water is $0.07 \mathrm{Nm}^{-1}$, angle of contact is $0^{\circ}$ and $g=10 \mathrm{~ms}^{-2}$ )
Air is filled at $60^{\circ} \mathrm{C}$ in a vessel of open mouth. The vessel is heated to a temperature $f^{\circ} \mathrm{C}$ so that $1 / 4$ th of the air is escaped from the vessel. Assuming air as ideal gas and the volume of the vessel remaining constant, then the value of $t$ is
TS EAMCET Papers
All year-wise previous year question papers