In a single pass drilling operation, a through hole of $$15$$ $$mm$$ diameter is to be drilled in a steel plate of $$50mm$$ thickness. Drill spindle speed is $$500epm,$$ feed is $$0.2mm/rev$$ and drill point angle is $${118^ \circ }.$$ Assuming $$2mm$$ clearance at approach and exit, the total drill time (in seconds) is

In a shaping process, the number of double strokes per minute is $$30$$ and the quick return ratio is $$0.6,$$ If the length of the stroke is $$250mm,$$ the average cutting velocity in $$m/min$$ is

Calculate the punch size in $$mm,$$ for a circular blanking operation for which details are given below.

Size of the blank $$25$$ $$mm$$
Thickness of the sheet $$2$$ $$mm$$
Radial clearance between punch and die $$0.06$$ $$mm,$$ Die allowance $$0.05$$ $$mm$$

Match the following metal forming processes with their associated stresses in the Work-piece