In a $$CNC$$ feed drive, a stepper motor with step angle of $$1.8deg$$ drives a lead screw with pitch of $$2mm.$$ The basic length unit $$(BLU)$$ for this drive is

A $$10mm$$ diameter annealed steel wire is drawn through a die at a speed of $$0.5/sec$$ to reduce the diameter by $$20\% $$. The yield stress of the material is $$800MPa.$$

Neglecting friction and strain hardening, the stress required for drawing (in $$MPa$$) is

Match the following

A blank of $$50$$ $$mm$$ diameter is to be sheared from a sheet of $$2.5$$ $$mm$$ thickness. The required radial clearance between the die and the punch is $$6\% $$ of sheet thickness. The punch and die diameter $$(mm)$$ for this blanking operation respectively are