Match the items in Group - $${\rm I}$$ and $${\rm I}$$ $${\rm I}$$

In a surface broaching process, a broach having $$5mm$$ pitch and cut per teeth $$0.05mm$$ is used for reducing the thickness by $$6mm.$$ If the length of the work piece is $$50mm$$ and the cutting speed is $$0.05m/s,$$ the time required / pass in seconds is

It is required to punch a hole of diameter $$10mm$$ on a sheet of thickness $$3mm.$$ The shear strength of the work material is $$420MPa.$$ The required punch force is

A $$\phi \,\,25$$ $$mm$$ hole is pierced in a $$t=2.5mm$$ thick steel sheet having shear strength $$\tau = 350\,\,MPa.$$ If the diametral clearance is given by the expression $$C=0.0064$$ $$t$$ $$\sqrt \tau ,$$ the die diameter (in $$mm$$), punch diameter (in $$mm$$) and punch force in $$(kN)$$ respectively are