Match List - $${\rm I}$$ with List - $${\rm I}$$$${\rm I}$$ and select the correct answer using the codes given below:

A $$\phi $$ $$40$$ $$mm$$ job is subjected to orthogonal turning by a $$ + {10^ \circ }$$ rake angle tool at $$500$$ $$rev/min.$$ By direct measurement during the cutting operation, the shear angle was found equal to $${25^ \circ }.$$

If the friction angle at the tool-chip interface is $${58^ \circ }$$ $$10'$$ and the cutting force components measured by a dynamometer are $$600$$ $$N$$ and $$200$$ $$N$$, the power loss due to friction (in $$kNm/min$$) is approximately

Consider the following statements with respect to the relief angle of cutting tool:

$$1.$$ This affects the direction of chip flow.
$$2.$$ This reduces excessive friction between the tool and work piece
$$3.$$ This affects tool life
$$4.$$ This allows better access of coolant to the tool-work piece interface

Which of the statements given above are correct?

In which of the choices given below, the cutting tool materials are placed in the ascending order of permissible cutting speed for machining of steel?