A job of the shape shown in the figure below is to be machined on a lathe. The tool best suited for machining of this job must have

A $$\phi $$ $$20$$ $$mm$$ through hole is to be drilled in a $$30$$ $$mm$$ thick plate using a double fluted, $${120^ \circ }$$ lip angle drill. The drill tip is at a distance of $$3$$ $$mm$$ from the plate surface when cutting is started and an over travel of $$2$$ $$mm$$ is recommended as a margin to ensure drilling through the full thickness of the plate. If the drill rotates at $$500$$ $$rev/min$$ and the feed per tooth is $$0.01$$ $$mm,$$ the machining time of the operation (in sec) will be

Consider the following statements:

The helical flute in a twist drill provides the necessary
$$1.$$ Clearance angle for the cutting edge.
$$2.$$ Rake angle for the cutting edge.
$$3.$$ Space for the chip to come out during drilling.
$$4.$$ Guidance for the drill to enter into the work piece.

Which of the statements given above are correct?

Match the mechanism with Machine