A work-piece of $$2000$$ $$mm$$ length and $$300$$ $$mm$$ width was machined by a planning operation with the feed set at $$0.3$$ $$mm/stroke.$$ If the machine tool executes $$10$$ double strokes/min, the planning time for a single pass will be

Find the speed range ratio for the drilling machine spindle if the minimum and maximum diameters of drills used are $$5$$ $$mm$$ and $$25$$ $$mm$$ respectively and if the machinability indices for the work materials are $$120$$ (brass) and $$40$$ (alloy steel)

If the index crank of a dividing head is turned through one complete revoluation and $$10$$ holes in a $$30$$ hole circle plate, the work piece turns through (in degrees)

A drilling machine has to be designed with $$8$$ spindle speeds ranging approximately between $$120$$ to $$1200$$ $$rpm.$$ The $${5^{th}}$$ spindle speed is