For true centrifugal casting process with the axis of rotation in horizontal direction, an acceleration of $$75g,$$ where $$g$$ is the acceleration due to gravity, is required for sound casting. The relation between diameter. $$'D'$$ (in $$mm$$) and the rotational speed $$N$$ ($$1$$ $$rev/s$$) for this casting is $${N^2}D = $$ constant, determine the constant. Also calculate the mold speed (in $$rev/sec(c)$$ for casting $$CI$$ pipes of $$5m$$ long with outside and inside diameters of $$0.52m$$ and $$0.5m$$ respectively

Which of the following powders should be fed for effective oxy-fuel cutting of stainless steel

A weld is made using $$MIG$$ welding process with the following welding parameters: Current: $$200A;$$ Voltage: $$25V;$$ Welding speed: $$18$$ $$cm/min;$$ wire diameter: $$1.2$$ $$mm;$$ Wire feed rate: $$4$$ $$m/min;$$ Thermal efficiency of the process: $$65\% $$

The heat input per unit length of the weld in $$kJ/cm$$ is:

A weld is made using $$MIG$$ welding process with the following welding parameters: Current: $$200A;$$ Voltage: $$25V;$$ Welding speed: $$18$$ $$cm/min;$$ wire diameter: $$1.2$$ $$mm;$$ Wire feed rate: $$4$$ $$m/min;$$ Thermal efficiency of the process: $$65\% $$

The area of cross section of weld bead in $$m{m^2}$$ is: