The height of the down sprue is $$175$$ $$mm$$ and its $$CS$$ area at the base is $$200\,\,m{m^2}.$$ The $$CS$$ area of the horizontal runner is also $$200$$ $$m{m^2}$$. Assuming no losses, indicate the correct choice for the time (seconds) required to fill a mold cavity of volume $${10^6}\,\,m{m^3}.$$ (use $$g=10$$ $$m/{s^2}$$)

The permeability of molding sand was determined using a saturated $$AFS$$ sample by passing $$2000cc$$ of air at a gage pressure of $$10$$ $$g/c{m^2}$$. If the time taken for the air to escape was $$1$$ min, the permeability number is:

Proper gating design in metal casting

$$P:$$ Influences the freezing range of the melt
$$Q:$$ Compensates the loss of fluidity of the melt
$$R:$$ Facilitates top feeding of the melt
$$S:$$ Avoids misrun

A $$10$$ $$mm$$ thick steel bar is to be horizontally cast with two correctly spaced top risers of adequate feeding capacity. Assuming end effect without chill, what should be the theoretical length of the bar?