In a cutting test with $$0.3mm$$ flank wear as tool failure criterion, a tool life of $$10min$$ was obtained at a cutting velocity of $$20m/min.$$ Taking tool life exponrent as $$0.25,$$ the tool life in minutes at $$40m/min$$ of cutting velocity will be

A work-piece of $$2000$$ $$mm$$ length and $$300$$ $$mm$$ width was machined by a planning operation with the feed set at $$0.3$$ $$mm/stroke.$$ If the machine tool executes $$10$$ double strokes/min, the planning time for a single pass will be

Match the following

Match the following