1
GATE ECE 2017 Set 1
MCQ (Single Correct Answer)
+2
-0.6
In binary frequency shift keying (FSK), the given signal wave forms are
$$\,{u_o}(t) = 5\,\cos \,(20000\,\pi \,t);\,0 \le \,\,t\, \le \,T,$$ and
$${u_o}(t) = 5\,\cos \,(22000\,\pi \,t);\,0 \le \,\,t\, \le \,T,$$

where T is the bit-duration interval and t is in seconds. Both $${u_o}(t)$$ and $${u_1}(t)$$ are zero output the interval $$0 \le \,\,t\, \le \,T$$. With a matched filter (correlator ) based receiver, the smallest positive value of T (in milliseconds) required to have $${u_o}(t)$$ and $${u_1}(t)$$ uncorrelated is

A
0.25 ms
B
0.5 ms
C
0.75 ms
D
1.0 ms
2
GATE ECE 2016 Set 3
Numerical
+2
-0
The bit error probability of a memoryless binary symmetric channel is $${10^{ - 5}}$$. If $${10^{ - 5}}$$ bits are sent over this channel, then the probability that not more than one bit will be in error is ________________
Your input ____
3
GATE ECE 2016 Set 2
Numerical
+2
-0
An ideal band-pass channel 500Hz-2000 Hz is deployed for communication. A modem is designed to transmit bits at the rate of 4800 bits/s using 16-QAM. The roll-off factor of a pulse with a raised cosine spectrum that utilizes the entire frequency band is____________________
Your input ____
4
GATE ECE 2015 Set 1
MCQ (Single Correct Answer)
+2
-0.6
A sinusoidal signal of 2 kHz frequency is applied to a delta modulator. The sampling rate and step-size $$\Delta $$ of the delta modulator are 20,000 samples per second and 0.1 V, respectively. To prevent slope overload, the maximum amplitude of the sinusoidal signal (in Volts) is
A
$${1 \over {2\pi }}$$
B
$${1 \over \pi }$$
C
$${2 \over \pi }$$
D
$$\pi $$
GATE ECE Subjects
EXAM MAP
Medical
NEET
Graduate Aptitude Test in Engineering
GATE CSEGATE ECEGATE EEGATE MEGATE CEGATE PIGATE IN
CBSE
Class 12